x4 Replacement Key, Maxi Miller®  - $20 
x1 HV NO SEEP NO. 1 WAX RING W/SLEEVE  - $4.0095 
x1 Picote Bladder 5"/4" T  - $345 
x3 Picote Generator 400v  - $48375 
x6 Pipe Cutter 4” UltraFlex®  - $7038.6 
x1 EXT TUBE SJ 1.25 X 8, BUDGET  - $38.14425 
x1 Smart Cutter™ Starter Package 6” Aluminum®  - $1747.2 
x4 1-1/4 in Cast Brass Grid Drain Tru-Drain  - $184.68 
x2 WallDrain Assembly 56-96 in. Side Waste Outlet Centered  - $9718.054 
x1 HV NS-1 WITH 1/4 X 2 1/4 BPS  - $6.2559 
x1 Cherne® REGULATOR ASSY, AIR NORGEN  - $42.466 
x3 Super Midi  - $27225 
x2 Picote Starter Kit 3” - 1/2” Shaft  - $1158 
x1 HV NS-1 056045 BPS BOLT BAG  - $5.95485 
x2 Horizontal Installation Panel 72IN  - $394.003 
x3 WallDrain Assembly 26-72 in. Vertical Waste Outlet Centered  - $9735.09 
x3 Centralizer Pipe Cutter 4”®  - $568.56 
x1 WallDrain Magnet THIN  - $5.5647 
x1 Deep Cup Stainless Steel Sink Strainer, Locking Shell, BN  - $33.9309 
x1 Pipe Cutter Super Flex Structure 8”®  - $1302.6 
x1 Sealed Connection Collar 8"/8" T  - $202.5 
x4 Battery Powered Mini Miller +C  - $39000 
x1 Small Grabber Jaw Set 1 for 3”  - $202.5 
x2 Smart Cutter™ Starter Package 3”®  - $4730 
x2 WallDrain Adjustment Panel Base 72 IN  - $294.751 
x1 Strain Relief, Maxi/Midi Miller®  - $95.18 
x1 Battery Powered Mini Cleaner - Cleaning Package  - $7200 
x1 Smart Cutter™ Starter Package 2” With Twister®  - $2365 
x3 Mini Miller 1/3″ Shaft x 55 ft (59 ft Overall)®  - $12420 
x1 Cherne® 1-1/2 in. Kwik ‘N Sure® Plug  - $10.63 
x1 Cherne® 15 In. 5% Fixed Steel Deflection Gauges for SDR-35 Pipe Per ASTM D3034  - $564.33 
x4 Mini Miller  - $18000 
x4 Maxi Miller  - $43940 
x1 Drain Cover Vertical 56IN POLISHED ROSE GOLD  - $653.909 
x2 Picote Starter Kit 3” - 1/3” Shaft  - $1155 
x1 Cherne® 48 In. Aluminum Fit Set for PS 115 (SDR-26) Pipe Per ASTM F679  - $1473.842 
x1 Cherne® 24 In. Aluminum Fit Set for PS 115 (SDR-26) Pipe Per ASTM F679  - $1157.046 
x3 Battery Powered Mini Cleaner +C - Cleaning Package  - $27900 
x1 NUT HEX 5/16-18 SS SELF-LOCKING  - $0.15795 
x2 Picote Starter Kit 4” - 1/3” Shaft  - $1218 
x3 Mini Miller +C  - $22500 
x1 Small Grabber Jaw Set 1 for 2”  - $172.5 
x1 Sealed Connection Collar 9"/4" T  - $180 
x1 LATCH, 5/16-18 UNCOATED, 2 IN. MONITOR WELL  - $6.1155 
x1 Cutting Tools Package  - $813 
x1 HV NO SEEP NO. 10 EXTRA THICK W/SLEEVE  - $6.9606 
x4 Picote Starter Kit 2” - 1/3” Shaft  - $2346 
x1 Cherne® Muti-Size ® Big-Mouth Plug® Flange Kit, 8 in. Bypass, 14-21 in.  - $721.025 
x2 Micro Miller 1/3″ Shaft x 39 ft (44 ft Overall)®  - $8920 
x2 Smart Cutter™ Starter Package 4″ Aluminum®  - $5150 
x1 Wall Drain Protective insert  - $7.9704 
x1 Special Drill Head Cutter for 3” Pipe - 1/2” Shaft  - $263.26 
x4 Battery Powered Mini Cleaner - Cutting Package  - $29400 
x2 Cherne® 8 In. 7.5% Fixed Steel Deflection Gauges for SDR-35 Pipe Per ASTM D3034  - $656.302 
x2 Smart Cutter™ Starter Package 8” Aluminum®  - $3662.4 
x1 Side Grinding Panel 6x6” for 4 or 6 Panel Hub  - $96 
x1 Strainer-Disposal Flange Pack, Br Strainer Assembly, Chrome  - $141.6596 
x2 Smart Spider 4” - 1/2” Shaft  - $1470 
x3 Horizontal Installation Panel 48IN  - $491.7552 
x3 Mini Cleaner +C - Cutting Package  - $22950 
x3 Maxi Miller Plus  - $34485 
x1 Cherne® PROVING RING, 12 IN. 5% Deflection, SDR 35  - $193.03 
x1 WallDrain Assembly 96-144 in. Side Waste Outlet Centered  - $6099.727 
x6 High RPM Hand Drill®  - $1534.26 
x1 Smart Crusher 6” - 3/4” Shaft  - $2727 
x1 Maxi Power+ & Picote Generator  - $31192.2 
x1 Cherne® 24in-36in Point Repair Carrier, 5ft  - $4 
x1 HV NO SEEP NO. 50 4 INCH THICK GASKET  - $7.08075 
x1 Mini Smart Heat Miller US  - $4290 
x2 Maxi Miller 1/2″ Shaft x 100 ft (110 FT OVERALL)®  - $3662.4 
x1 Cherne® 15 In. 5% Fixed Steel Deflection Gauges for SDR-26 Pipe Per ASTM D3034  - $564.33 
x1 Mini Sweeper Leg 3”  - $67.88 
x3 Strain Relief, Micro/Mini Miller®  - $236.94 
x1 Hub Disc for Smart Sweeper 2”  - $19.11 
x2 WallDrain Assembly 26-48 in. Side Waste Outlet Centered  - $4928.732 
x1 2 in Faucet Hole Cover, Chrome  - $11.84895 
x1 Cleaning Chain 1.57” - 1/3” Shaft  - $19.5 
x1 Cherne® 0–10 psi Test Pressure Gauge – Retarded increments from 11–30 psi  - $136.257 
x1 Centralizer Pipe Cutter 6”®  - $189.52 
x1 Cherne® 2 1/2 in. F NPT Cap Conversion Kit  - $83.344 
x1 HV NS-1 W/2 BRASS BOLT 4-RW 4-SN  - $8.32275 
x1 High Torque Hand Drill®  - $427.14 
x1 Cherne® 6 In. 7.5% Fixed Steel Deflection Gauges for SDR-35 Pipe Per ASTM D3034  - $252.075 
x1 Smart Spider+ 6” - 3/4” Shaft  - $1537 
x1 BULKHEAD, 1/4 NPT SHORT NECK  - $13.3083 
x2 Battery Powered Mini Cleaner +C - Cutting Package  - $18900 
x3 Battery Powered Mini Miller  - $21600 
x1 Cherne® 2 in. F NPT Cap Conversion Kit with Quick-Disconnect Fittings  - $64.154 
x1 Hub .6x1.18” for 1¼” Pipe - 1/4” Shaft No Wedge  - $83.85 
x2 Midi Miller 1/2″ Shaft x 39 ft (44 ft Overall)®  - $16832 
x1 Cherne® FIN SET 48 IN SDR 26 7.5 PERCENT 41.82 GA DIA  - $1473.842 
x1 Mini Cleaner US - Cutting Package  - $4650 
x1 4 IN. PVC COMMERCIAL DRAIN W/CAST IRON GRATE BUCKET  - $195.7986 
x1 Pipe Cutter 6″ Panel Package®  - $507.36 
x1 Push Rod 4-9”  - $427.5 
x1 TAILPIECE 1.5 X 1.25 X 8 IN., 20 GAUGE  - $51.0233 
x1 WallDrain Drain Connector 24 IN  - $30.97845 
x1 Front Drill Head 8”  - $1014 
x1 Cherne® 10 In. 7.5% Fixed Steel Deflection Gauges for SDR-35 Pipe Per ASTM D3034  - $386.06 
x1 WallDrain TileIn 72 IN Cover  - $240.6119 
x1 Twister Express 4” for Lined Pipe - 1/2” Shaft  - $998 
x1 Drain Cover Vertical 56IN MATTE BLACK  - $482.004 
x1 Cherne® 3 in. F NPT Cap conversion kit  - $124.902 
x1 SLIPNUT, 2, BULK  - $4.16745 
x1 Cherne® 24in-36in Point Repair Carrier, 10ft  - $6 
x1 Magnet Cover 72IN  - $138.3521 
x1 Original PVC Chain 2” 1 Chain Model - 1/3” Shaft  - $36 
x1 Smart Cutter™ Starter Package 3” With Twister®  - $2575 
x1 WallDrain Adjustment Panel Base 48  - $103.7651 
x1 Front Drill Head 60 for Concrete Remover+  - $328 
x1 WallDrain Assembly 96-144 in. Vertical Waste Outlet Centered  - $6099.727 
x1 Special Drill Head Cutter for 2” Pipe - 1/3” Shaft  - $244.5 
x1 Cherne® Protective Sleeve, 48-72 in.  - $3 
x2 Furring Strip 48IN  - $101.9601 
x1 Tiger Cyclone Chain 3” - 1/3” Shaft  - $162 
x1 1-1/4 X 4, STRAINER TAILPIECE, BUDGET GA  - $8.4402 
x1 EXT TUBE SJ 1.25 X 12, 17 GAUGE  - $108.6453 
x1 Cherne® 8-12 in Carrier, Point Repair, 5 Ft  - $1 
x1 HV NO SEEP NO. 10 WITH 1/4 BPS BOLT KIT  - $7.4412 
x1 HV NO SEEP NO. 50 W/BRASS BOLT DNUTS  - $9.8766 
x1 Cherne® 12 In. 5% Fixed Steel Deflection Gauges for SDR-26 Pipe Per ASTM D3034  - $474.627

Home / Store / 7.5% Fixed Steel Deflection Gauges for SDR-35 Pipe Per ASTM D3034 (4" – 15" Diameter), Deflection Gauges / Cherne® 15 In. 7.5% Fixed Steel Deflection Gauges for SDR-35 Pipe Per ASTM D3034

Store

Name: Cherne® 15 In. 7.5% Fixed Steel Deflection Gauges for SDR-35 Pipe Per ASTM D3034
SKU: 286768
Price: 564.33 USD
Availability: InStock

View cart “Cherne® 12 In. 5% Fixed Steel Deflection Gauges for SDR-26 Pipe Per ASTM D3034” has been added to your cart.

Cherne® 15 In. 7.5% Fixed Steel Deflection Gauges for SDR-35 Pipe Per ASTM D3034

$564.33

Part Number: 286768

Nominal Size: 15″ (381.00 mm)

Average Pipe ID: 14.374″ (365.10 mm)

Base Pipe ID: 13.897″ (352.98 mm)

Pipe ID @ Defl: 12.85″ (326.40 mm)

Product wt: 13.5 lbs.

The product is already in the wishlist! Browse Wishlist

SKU: 286768 Categories: 7.5% Fixed Steel Deflection Gauges for SDR-35 Pipe Per ASTM D3034 (4" – 15" Diameter), Deflection Gauges

Call Now Button

Call Now

Cherne® 15 In. 7.5% Fixed Steel Deflection Gauges for SDR-35 Pipe Per ASTM D3034

Navigate

Top Products

Connect

Contact

Store

Cherne® 15 In. 7.5% Fixed Steel Deflection Gauges for SDR-35 Pipe Per ASTM D3034

Related products

Cherne® 8 In. 5% Fixed Steel Deflection Gauges for SDR-26 Pipe Per ASTM D3034

5% Fixed Steel Deflection Gauges for SDR-26 Pipe Per ASTM D3034 (4" –15" Diameter), Deflection Gauges

Cherne® 8 In. 7.5% Fixed Steel Deflection Gauges for SDR-35 Pipe Per ASTM D3034

7.5% Fixed Steel Deflection Gauges for SDR-35 Pipe Per ASTM D3034 (4" – 15" Diameter), Deflection Gauges

Cherne® 10 In. 7.5% Fixed Steel Deflection Gauges for SDR-35 Pipe Per ASTM D3034

7.5% Fixed Steel Deflection Gauges for SDR-35 Pipe Per ASTM D3034 (4" – 15" Diameter), Deflection Gauges

Cherne® 10 In. 5% Fixed Steel Deflection Gauges for SDR-26 Pipe Per ASTM D3034

5% Fixed Steel Deflection Gauges for SDR-26 Pipe Per ASTM D3034 (4" –15" Diameter), Deflection Gauges